-
By accessing this website you agree to the terms and conditions that govern
its use. Please see our Legal page before
proceeding further. Copyright © 2005 Hevday Logic Limited.
All rights reserved.
Website queries should be directed to
Webmaster
|
The 'Print Setup' button on the Data Display and Signal Display shows options for printing waveforms.
This item allows you to specify a horizontal range to print. There are two options, 'All Clocks' will print out every clock currently recorded in the Data Display or Signal Display, while 'Clocks between markers' will print out only the clocks between Marker 1 and Marker 2. If both markers are on the same clock then all the clocks will be printed, as though 'All Clocks' was the active option. If Marker 1 is not set then it is assumed to be at position 0. If Marker 2 is not set then it is assumed to be at the last scan.
With this item you can specify the printing to be done at the current zoom level,
or the normal zoom level.
In the components list of the Data Display or the signals list of the Signal Display, the user can select one or more components or signals by using the Ctrl or Shift key while clicking on the components or signals. If this item has the option 'Selected Waveforms' checked then only those waveforms that are selected will be printed. If the option 'All Waveforms' is checked then all waveforms will be printed regardless of which waveforms are selected.
|
